« Previous Entry | MAIN | Next Entry »
June 12, 2003
I have a 8/75 mg midget and am having a major problem with it. The
problem is that has way too much negative camber, tip in at top of
tire, on the left front.
I have replaced the off center bushings in the left lower a-arm,
bought a shop manual from Moss and checked the measurements on the
pivot points for the lower a-arms, checked the distance measurements
on the left lower a-arm against the right lower a-arm, pulled and
checked the left shock mount to see if it had been modified and it
hasn't.
I guess my question is, is there a camber adjustment kits that can
either be bolted in place or welded in place to correct this? or am
I going to have to take it to a body shop with a frame straightner?
"wimpy_43" < wimpy_43@... > 22578
Posted on June 12, 2003 12:00 AM
Posted to category(s) Body
| Exterior
| Ignition System
| Restoration
| Specifications
| Suspension & Steering
| Technical Info
| Wheels
