« Previous Entry | MAIN | Next Entry »
July 22, 2004
I lowered my 1 =BD inches by putting in longer bolts with matching spacers
cut
from pipe above the spring pans. It is fast, easy and best of all cheap.
Nigel is correct, don=92t forget to get grade 8 bolts for the replacements.
I
took out two bolts opposite each other and put I the longer bolts, then
slowly back out the other two short bolts so you always have two bolts
holding the spring in place. They can be dangerous. Back out the first two
and insert the spacers and snug down then the same with the others.
Cheers,
Bob in San Diego
"Robert D. Gardner" < rdgard@... > 33110
Posted on July 22, 2004 04:59 PM
Posted to category(s) Electrical System | Engine (external) | Exhaust System | Intake System | Miscellaneous | Suspension & Steering | Wheels
