« Previous Entry | MAIN | Next Entry »
July 27, 2004
Hi
The 14W wiper motor was made in single speed and two speed versions. This is the round motor can type located under bonnet.
Anyone changed their single speed wiper motor and switch for the two speed versions? I have the two speed wiper switch and a two speed 14W wiper motor. Someone told me the single speed motors only had 4 out of the 5 terminal positions fitted whereas the two speed ones had all 5 terminals present. Wrong. My old single speed motor had all 5 terminals fitted but not all connected. The two speed one has 3 wires going into the motor can the single speed one two wires.
The motor parks with the wipers vertical not flat to the screen bottom. I have had to take the two speed one apart, lift the round driving disc on top of the large plastic gear wheel and turn it round 180 deg then push it back. There are two location lugs to enaable this to be done.
However having wired it to the Haynes diagram the fast speed is the same as the slow one. Anyone sorted out the connections so I do not have to reinvent the wheel?
Terry
< terry.isherwood@... > 33151
Posted on July 27, 2004 11:45 PM
Posted to category(s) Body | Braking System | Drive Train | Electrical System | Engine (external) | Exterior | Interior | Technical Info | Tuning | Wheels
